Working on these installs has been a great learning experience. I noticed the stock lifting system for the 1103 was tough with this heavy pylon. Using a Block & Tackle 2 fold purchase was able to overcome this hurdle. Although the pull is longer it is much easier to trim the motor up and down.

Update:

Installing a single Harken Pully at the bottom location ensures a smooth pull but a shorter pull amount. Plus is more economical.

HARKEN Micro Block | Premium Sailing and Sailboat Equipment
Nite Ize S-Biner Marine SlideLock 2, 316 Stainless Steel, Marine-Grade S-Biner with Two, Independently Locking Gates Size #2 for 10lb Rating Harken – 1/4 Stainless Shackle Amarine Made Stainless Steel Bimini Boat Top PAD Eye, Eye Straps, Tie Down, Kayak Deck Loops, Tie Down Anchor Point, footman’s Loop for Kayak Canoe Rigging (6-Pack)
2 fold purchase

The new Torqeedo “C” Mount Utilizes a 4 molded threaded insert pattern consistent with Power Pole Mounting. Unfortunately the Jackson Kayak Kilroy does not come with this option. I opted to fabricate a custom mounting plate from 1/2″ Starboard then mounting to where the existing handle was located.

If I was to permanently install the mount on the rear of the Kilroy, it would interfere with my car top loading method. To remedy this issue I came up with the idea of utilizing 12″ gear track to slide the mount into a stowed position on loading, then slide out for use. I Drilled the track and countersunk larger holes to allow 1/4 20 bolts to pass through.

The use of Yakattack T bolts & Track Nuts allow quick tightening and loosening of the mount to either stow or retract for use.

The A/C motor install used all of my previous steering. I only had to modify the up/dn line for a longer distance.

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.

An install I’v only dreamed about! A Torqeedo 403 A/C on a Jackson Kayak Mayfly!! Well it all started the day Aaron walked into Delaware Paddlesports. He wanted the 2019 Jackson Kayak MayFly with a Torqeedo Ultralight 403 AC and integrated Sealect Designs Steering system!

Products Used

  • Torqeedo 403 A/C Install Kit
  • Jackson Kayak Rudder Tubing Kit
  • Jackson Kayak Stainless Steel Cable Kit
  • Sealect Designs Trucourse Steering Footbraces
  • Sealect Designs Thomble & Swage Kit
  • (4) 2″ 1/4-20 Philips pan head bolts
  • (2) 1/4-20 Well Nuts
  • (1) Yakattack Stealth Pulley
  • Pad Eyes

Install

This custom install consisted of removing the stock Fly Box storage hatches as they would not be able to function with the footbrace system. The recesses can still be used to stow tackle boxes.

The footbraces were then installed using the 2″ 1/4-20 Bolts the front locations are thru bolted and the rear ones well nutted due to the inability to reach inside the hull at that distance.

Steering cable plumbing

Plumbing tubing and steering cable were run from the stern inside the hull and out the tackle box recesses connecting to the foot braces to allow maximum turning radius.

Mounting the motor bracket

The Torqeedo mounting bracket mounts perfectly to the four bolt molded inserts on the stern of the MayFly which makes it a simple installation over the previous ball and bar mounting system. Completely a no drill motor mount install! The Torqeedo kit includes 1/4-20 mounting bolts.

Up/Dn & Reverse Lock Lines

Right Side installed is Up/Dn Line and Left Side installed is Reverse Lock Line. The lines are both run through Sealect Designs track mounted clam cleats.

Throttle Mounting

The plus of the YakAttack Throttle Mount the ease of connecting disconnecting via the Lock N Load system.

Page 1 of 512345
%d bloggers like this: