The Jackson Kayak Yupik was introduced in 2018 and made it into full production in 2019 for the 2020 model season. Received the kayak in May 2020. Was skeptical about the design since having mostly owned traditional paddling Jackson Kayak models in the past. However wanted to keep with a lighter weight in terms of sit on top kayaks with stability but really liked the customizable options due the the amount of gear track included stock from the factory. With a MSRP of $1,299 USD it is a great starter kayak!

Carrying Handles

The molded in bow & stern handles are actually much more comfortable than the old style bolt on ones! Much more ergonomic and larger diameter for more grip! Nice design!

Open deck

The open deck design is really nice! If you are a fly angler or just don’t like clutter in front of you the Yupik has this covered! The front dug out canoe style offers space for your dry bags with slots under the gear track makes it easy to cam strap and secure your gear in place.

Seating

The Elite Seat 3.0 (Discontinued) and on 2021-Current models Comfort Seat 4.0 give you all day comfort with its wide seat cushion and ergonomic seat back. The new Comfort Seat also features the Molle panel on the seat back to customize seat back storage from hydration systems to tackle storage to emergency kits.

The seat pan offers a high/low position and also slides the length of the kayak enhancing the ability to trim out the entire kayak or just to make more space to bring along a child or your favorite pet! The footbrace pegs are also track mounted and slide along with the seat for maximum comfort to generate an efficient paddle stroke.

Gear Track System

The Yupik includes factory installed gear track from bow to stern! This allows adding accessories a breeze! Any track mount accessory can be mounted on the track making you Yupik completely customizable to your specifications! Full Length Gear Track on the right and left side and a center track extends from the edge of the Scooped bow to the stern of the tank well.

Storage

Although the Yupik does not feature hatches for internal storage the deck is well configured for your tackle management. There are 4 seat side tackle stagers molded into the hull. This allows Plano 3460 style tackle boxes to be seated here for quick access! Also 2 areas to stow your cell phone at hand.

The seat pan also allows for additional storage. From tackle boxes to small dry bags.

The rear tankwell area is extremely large. It can easily hold a milk crate or up to a 35 QT Orion Cooler! The tankwell area also includes the Strap down gear track system for cam strapping additional gear down.

Stern

At the stern you will find a securable molded in battery recess if you add on a trolling motor. Also included is a (4) molded 1/4-20 threaded inserts for the addition of a Powerpole Micro Anchor or Torqeedo Motor accessory! The drain plug is located on the rear left side.

Hull

The hull has a total of (11) structural scupper holes for draining the deck and keeping it structurally sound for holding weight. Two of the scuppers are recessed in the hull to accept small to medium fish finder transducers. Also included is a replaceable skid plate to enable saving scraping the keel on boat ramps and pavement.

Yupik Hull

Accessories

The Yupik includes a Yakattack Omega Rod Holder, Stand Up assist strap, Long Load Red Flag, & a 5: Jackson Kayak Sticker with new kayak purchase.

Specs

  • Length: 12′ 2″
  • Width: 35″
  • Height 12″
  • Capacity: 425 lbs Total
  • Weight: 90 lbs

Review:

The overall quality of the Jackson Kayak Yupik is satisfactory! As always Jackson made in the USA offers a top quality fishing kayak! The overall appearance of the kayak is sleek and modern but with that authentic dug out canoe look of hand made kayaks of the indigenous people many years ago. The 2021 model is offered in 3 factory colors. Earth (Blue Lime & White) Forest (Olive Tan & Black) and Rock & Rockfish (Red Gray & Black).

I feel the kayak paddles with ease which is amazing for a 35″ wide hull. It turns simply with a J paddle stroke. Stability is top notch you can stand on this boat like you would on a floating dock. Stand up paddling is simple also. It is a fast hull for its dimensions and design. Can handle fast moving water such as rivers and excels in back bay/large lakes.

The Comfort Seat 4.0 is incredibly comfortable from sitting all day moving to standing position and ease of sitting back in the seat. The low position allows for less fatigue paddling long distance and to add power to your stroke. The high position allows the ease of standing. A 250 cm – 260 cm paddle is recommended for the width of the boat in the high or low position.

Fully customizable due to its ample amount of included gear track the Yupik can be grown into. From beginners to advanced kayak anglers platform is multi use can be accessorized to fit you. I personally use the Yupik for many outdoor activities. From fishing to photography and yes even kayak camping trips!

The Jackson Kayak Yupik has grown on me!

The new Torqeedo “C” Mount Utilizes a 4 molded threaded insert pattern consistent with Power Pole Mounting. Unfortunately the Jackson Kayak Kilroy does not come with this option. I opted to fabricate a custom mounting plate from 1/2″ Starboard then mounting to where the existing handle was located.

If I was to permanently install the mount on the rear of the Kilroy, it would interfere with my car top loading method. To remedy this issue I came up with the idea of utilizing 12″ gear track to slide the mount into a stowed position on loading, then slide out for use. I Drilled the track and countersunk larger holes to allow 1/4 20 bolts to pass through.

The use of Yakattack T bolts & Track Nuts allow quick tightening and loosening of the mount to either stow or retract for use.

The A/C motor install used all of my previous steering. I only had to modify the up/dn line for a longer distance.

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties.  ThePlasticHull.net its authors or any other source of information on this website is in no way responsible for your actions nor any type issues or damage that may occur.  The information provided on this website is a free reference guide only. The authors of all information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that destruction of property, injury, or death could occur.

An install I’v only dreamed about! A Torqeedo 403 A/C on a Jackson Kayak Mayfly!! Well it all started the day Aaron walked into Delaware Paddlesports. He wanted the 2019 Jackson Kayak MayFly with a Torqeedo Ultralight 403 AC and integrated Sealect Designs Steering system!

Products Used

  • Torqeedo 403 A/C Install Kit
  • Jackson Kayak Rudder Tubing Kit
  • Jackson Kayak Stainless Steel Cable Kit
  • Sealect Designs Trucourse Steering Footbraces
  • Sealect Designs Thomble & Swage Kit
  • (4) 2″ 1/4-20 Philips pan head bolts
  • (2) 1/4-20 Well Nuts
  • (1) Yakattack Stealth Pulley
  • Pad Eyes

Install

This custom install consisted of removing the stock Fly Box storage hatches as they would not be able to function with the footbrace system. The recesses can still be used to stow tackle boxes.

The footbraces were then installed using the 2″ 1/4-20 Bolts the front locations are thru bolted and the rear ones well nutted due to the inability to reach inside the hull at that distance.

Steering cable plumbing

Plumbing tubing and steering cable were run from the stern inside the hull and out the tackle box recesses connecting to the foot braces to allow maximum turning radius.

Mounting the motor bracket

The Torqeedo mounting bracket mounts perfectly to the four bolt molded inserts on the stern of the MayFly which makes it a simple installation over the previous ball and bar mounting system. Completely a no drill motor mount install! The Torqeedo kit includes 1/4-20 mounting bolts.

Up/Dn & Reverse Lock Lines

Right Side installed is Up/Dn Line and Left Side installed is Reverse Lock Line. The lines are both run through Sealect Designs track mounted clam cleats.

Throttle Mounting

The plus of the YakAttack Throttle Mount the ease of connecting disconnecting via the Lock N Load system.

Page 1 of 20123451020...Last »
%d bloggers like this: